Flexibility
The simplicity of our structures gives you the flexibility to design your own building and layout to suit your specific requirements.
It’s as easy as this;
- Work out how many stalls you require
- Stall sizes
- Number of feed and or tak rooms required
- Additional undercover areas such as horse floats, tractors or machinery space.
- Fill out the feedback form below, phone or email your enquiry
It doesn’t get much easier than this when it comes to building horse shelters and stables.
Supplied in kit form the 6m X 4.5m Standard Stable Kit measures 6000mm long x 4500mm wide, 2000mm wall height and 3500m to the roof peak and can be configured to suit your requirements.
Options:
- Paddock shelter without divisions
- 2 x stall horse stalls (3m x 3m)
- 1 x horse stall and 1 x machinery room, feed room, tak room or a combination.
The choice is yours; Standard Stable Kits are supplied with waterproof woven poly roof and walls, galvanised posts and hoops, screws, fasteners and a comprehensive instruction manual.
Standard Stable Kits can be ordered without walls if a waterproof only roof is required (wall can be retro fitted at a later date if required).
Stable Kits are supplied in kit form only and do not include internal walls.
How easy is it to install a Stable Kit?
Standard Stable Kits are supplied with footing tubes which are concreted into the ground and as soon as the concrete has set the side posts and hoops can be fitted into the footing tubes and the structure grows from there – providing the footing tubes are set the Standard Stable Kit can be completed in less than one day.
Standard Stable Kits are wind rated for most areas.
Price ex Ballina NSW $3,905.00 incl. GST
Order before 31st August 2010 and PAY ONLY $3,514.50 incl GST - plus delivery
$390.50 saving
6m x 10m Standard Colonial Stable Kit
Price ex Ballina NSW $6,633.00 incl. GST
Order before 31st August 2010 and PAY ONLY $5,969.70
incl GST - plus delivery
$663.30saving
Also supplied in kit form the 6m X 10m Standard Colonial Stable Kit measures 6000mm wide x 10000mm long, 2000mm wall height and 3500m to the roof peak and can be configured to suit your requirements.
Configuration:
- 2 x stalls (4m x 4m)
- 1 x tak/feed room (2m x 4m)
Options:
- Tak/feed room can be located at either end of the building or in the middle as illustrated below.
The choice is yours; all Standard Colonial Stable Kits are supplied with waterproof woven poly roof and walls, galvanised posts and hoops, screws, fasteners and a comprehensive instruction manual.
